Application of high strength threaded inserts:
应用一、高强度
螺纹护套应用于螺丝孔螺牙的修复。由于，螺丝孔的材质的强度可能不达标，或是螺孔孔的基件使用的时间过久，使螺丝孔被损坏，这时，可以用高强度螺纹护套来修复。
Application of a repair, high strength threaded inserts is applied to the screw hole thread. Because, the screw hole material strength may not standard, or screw hole parts use time is too long, so that the screw hole is damaged, then, can use high strength threaded inserts to repair.
应用二、高强度螺纹护套应用于加强螺丝孔的质量。比如，在火花塞等高温或是金属与非金属的材质强度低的场所使用安装高强度螺纹护套就可以增加产品的质量。
Application of quality of two, high strength threaded inserts is applied to strengthen the screw hole. For example, in the spark plug, high temperature or metal and non metal material strength low places installation of high strength threaded inserts can increase the quality of the products.
应用三、延长基件的使用的寿命。这是螺纹护套产品的*基本的功能。同时也是这些螺套的价值所在。通常，在螺丝孔里安装螺纹护套就是为了延长基件的使用寿命。
Application of three, prolong the base part of life. This is threaded inserts products the most basic function. At the same time the value of the screw sleeve. Usually, the installation threaded inserts in the screw hole is in order to extend the service life of the base member.
高强度螺纹护套的功能特点：
Features high strength threaded inserts:
1. 加强螺丝孔的防锈、防腐、耐热、耐磨的功能，提高产品基件的质量。
1 strengthen the screw holes, heat-resistant, wear-resistant, anti-corrosion rust proof function, improve the quality of products base.
2. 改善连接条件，增加螺纹连接的承载力和抗疲劳强度。
2 to improve the connection conditions, increase the threaded connection bearing capacity and fatigue strength.
3. 用于对螺丝孔损坏时，进行快速修复。
3 for screw hole damage, rapid repair.
4. 加强基件对螺丝孔螺栓，防震动与防松脱的功能。
4 strengthen based on screw holes for bolts, anti vibration and anti loose function.
5. 增大基件螺丝孔的受力面、增加基件螺丝孔也螺栓的连接强度。
5、The stress surface, increasing the base member 5 screw holes increase the connection strength matrix screw holes or bolt.
